BTR DG-Mini, Manual

Page: 39 / 71

BTR Controls, Inc.
PROGRAMMING
DG-Mini V7 Rev. C Standard HW manual V 1.0.2 39
I
NPUTS
The DG-Mini includes 8 user-programmable inputs. Each Input can be individually configured through a multilevel
menu.
Start by selecting the desired physical input using the Input Menu.
Then select the desired configuration submenu as described below.
CAUTION
Loading a profile will replace the input
configuration with the profile’s default settings.
This will cause any manual changes to the Input
configuration to be lost.
I
NPUT
M
ENU
C
ONFIGURATION
S
UBMENU
Sub menus: Description:
Function
Submenu to select the function for the input.
See the table below for descriptions of input functions.
Name
Submenu to select the name to be associated with the
input.
The menu contains a list of commonly used names.
Note:
this name is only used in the Idle screen. It does not
change the name used in the configuration menu.
Logic Submenu to select the logic for the input, either NO / NC.
I
NPUT FUNCTIONS
M
ENU
I
TEM
Description: (when the input is active)
No Function Input is disabled.
Manual 1
An activation of this input will open the door unless the door is already at an open
position. In this case the door will close. If the Man 1 Timer is set greater than zero
the controller will delay closing of the door until the timer has expired.
Open
An activation of this input will open the door to the Fully Open position.
Auto 1
An activation of this input will open the door to the Fully Open position. The
controller will then delay the door for the duration of the Auto 1 Timer. Upon
expiration of the timer the controller will then close the door to the Closed Position.
Stop
Activation of this input will stop motion of the door. This input is also used to clear
certain error conditions.
Close An activation of this input will close the door to the fully close position.
Emergency Stop An activation of this input will cause the door to immediately stop motion.