BTR DG-Mini, Manual

Page: 53 / 71

BTR Controls, Inc.
PROGRAMMING
DG-Mini V7 Rev. C Standard HW manual V 1.0.2 53
DG-Xnet
This menu is used to configure the DG-Mini when the DG-Xnet is installed.
Note: The DG-Xnet is an optional feature requiring a special hardware module connected that is connected to the
controller’s RS485 port. The DG-Mini must detect this module during startup; therefore ensure required
connections are made prior to startup. Refer to DG-Xnet documentation for further details.
DG-X
NET
M
ENU
Submenu Description:
Enable
Enable
Submenu to enable or disable DG–Xnet operation
Disable
Discover Used to find other DG- Xnet devices in range.
Connect
Submenu to enable communication between other DG-Xnet devices.
X-Lock
Submenu to enable a wireless airlock between and up to five other
DG-Xnet devices.
Clear all
Used to disconnect all previously connected DG-Xnet devices from the
DG-Mini. A reconfiguration of the DG-Xnet will be required.
Settings
Channel
Used to set the communication channel
for the DG-Xnet.
NOTE
Network ID
Used to set the Network ID for the DG-
Xnet.
These settings must match
all other DG-Xnet devices
that are to be networked