Brute Elite BNTH1000, Installation And Operation Instruction Manual

Page: 48 / 141

Page 44
Bradford White Corp.
fig. 45 - edit Safety Data
5. Once you are done changing safety
parameters, press Confirm. The system will
present a listing for each group of parameters
which includes a changed safety parameter.
See Fig. 46.
Fig. 46 - Safety Parameter Confirmation
6. For each group, check the list carefully. Press
Yes if all of the parameters in the group have
been entered correctly.
If you made changes in other safety-related
groups, verify the entries in those groups in
the same way. When the process is complete,
the system will tell you to reset the control
system.
fig. 47 - Safety Parameter reset
7. As we said, the Reset button is located on the
front of the controller. See Fig. 44. You must
press the Reset button within 30 seconds, or
the verification will be cancelled.