Brute Elite BNTH1000, Installation And Operation Instruction Manual

Page: 41 / 141

Page 37
Brute Elite Boilers and Water Heaters
Section 8
USInG tHe ControlS on tHe
BrUte elIte
8.1 Controls and Indicators on the
front of the Unit
There are only a few controls and indicators on the
front of the unit. See Fig. 23. Most of the control
functions are done using the Operator Interface
panel.
8.2 Using the operator Interface
The Brute Elite uses a color touch screen Operator
Interface to get input from the operator or installer,
and to present information about the operation of the
boiler. Each boiler includes a touchscreen, but in a
typical installation, only the touchscreen on one of
the boilers will be active.
fig. 23 - Controls and Indicators on front of Unit
On/Off
switch
Operator
interface
panel
Boiler
outlet
temperature
and system
pressure
fig. 24 - operator Interface
Most of the control functions are done using the
touch screen area in the center of the panel.
Here’s a typical screen or “page” presented by the
system:
fig. 25 - Status Summary Screen
There are some icons at the top of this screen (and
most of the other screens) that will help you move
around the system: