Brute Elite BNTH1000, Installation And Operation Instruction Manual

Page: 43 / 141

Page 39
Brute Elite Boilers and Water Heaters
At the bottom of the screen shown in Fig. 28, the
system is telling you that it wants you to log in.
fig. 28 - login required
The screen used to Login is similar to the Keyboard
screen shown in Fig. 26.
8.3 While operating - Checking
lead/lag operating Information
The Lead/Lag function controls the operation of all
of the boilers connected to the system, and some
system components. For a complete explanation of
Lead/Lag, see the beginning of Section 9.
In this section, we will explain how to check the
Lead/Lag information while the system is running.
1. Start at the Home screen (Fig. 29).
fig. 29 - Home Screen
Up to 8 controllers, or up to 4 boilers, can be
displayed on the Home page. The icon for
each system will appear in one of four colors:
Blue Normal operation
Red Lockout
Gray Standby mode
(Burner switch off)
Gray and
crossed out
Communication
problem
Yellow Hold state. This
could be Anti short
cycle, fan speed
transitions, etc.
2. Press the View Lead Lag button to go to a
screen that shows the status of the whole Lead/
Lag system. See Fig. 30.
fig. 30 - lead/lag Screen
In the example shown here, the complete
system includes two burners. Both burners are
firing at 35% fan speed.