Synergy Maintenance Page 2
There is one Mixing Tank per Pretreat Fluid, which acts as
a reservoir during sprays. The tank
will automatically refill
when it dips below a threshold.
Image 4
Image 4
: Mixing Tank
Bowl Filters are installed throughout the system, one on
each pump. They are used to prevent contaminants from
reaching system critical components and increasing the
lifespan of these components. With these filters it is normal
for air to become trapped on the inside, and leak back
through the inlet when the pump is not in operation.
Image 5
Image 5: Inline Bowl Filter
S
pray Chamber Components
The Spray Carriage contains 2 nozzle sets (referred to as
heads), each containing 3 nozzles. Each nozzle is designed
to spray a specific width (6”, 12” or 18”). The system
automatically decides which nozzle is best depending on
the given spray area for a spray. The system is designed to
use ball valves to route either Pretreat Fluid to either Spray
Head (For more information, see the
Maintenance Screen
Section under
Plumbing Configurations
). The carriage is
designed to be easily replaced which a spare carriage in the
event of nozzle failure. Valves used in the Nozzles will be
labeled
SVx
.
Image 6,7 and 8
Image 6: Spray Carriage
Image 7: Spray Nozzle Assembly
