expand bulb holders to allow bulbs to
slide).
9)
Reverse steps to install new bulb.
Figure 4: Bulb Control Screen
SECTIONS PULL APART (NOTE
WIRE CONDUIT STRAIN)
BULB RACKS PULL OUT
BULBS
Figure 5: Bulb Access
Check Camera Cooling Fan Filters:
Inspect camera cooling fan filters above main
heat sections (Figure 6). Replace as necessary.
Clean Blinders:
1)
Remove camera access plate (Figure 6)
2)
Clean lint & dust from camera cooling
fans and camera bulb blinders.
CAMERA ACCESS PLATE
BLINDER
CAMERA
COOLING FAN
COOLING FAN FILTER
Figure 6: Camera Access
Clean Camera Lenses:
1)
Remove camera access plate (Figure 6)
2)
Use a lint-free cloth to gently clean any
lint or dust from bottom lens of camera
