Brother p900w User Manual Download Page 33

Page: 33 / 238

Using the Other Interfaces (Serial Interface/Bluetooth Interface)

Connecting Using the Serial Adapter (Optional:PA-SCA-001)

You can connect the P-touch Label Printer to a barcode scanner or scale using a serial interface.

Before connecting the serial cable, make sure the P-touch Label Printer and the barcode scanner or
scale are turned off.

Connect the RJ25 end of the adapter to the P-touch Label Printer.

Connect the P-touch Label Printer end of the serial cable to the DB9M side of this adapter.

Connect the other end of the serial cable to the serial port on your barcode scanner or scale.

Note

• The serial interface is not compatible with the Windows

or Mac printer drivers and is only used for

template mode.

• The default communication settings are as follows:

Baud rate: 9600 bps
Parity: None
Bit length: 8 bits
Flow control: Hardware

• To change the communication settings, use [P-touch Template Settings] in the Printer Setting Tool. For

more information on setting the P-touch Label Printer baud rate, download

P-touch Template

Manual/Command Reference

(English only) from the Brother Solutions Center at support.brother.com

To download the latest version, from the Brother Solutions Center website:
1 Visit support.brother.com
2 Select the product, and then select [Manuals].

Serial adapter converts RJ25 to a D-sub 9-pin male connector.

1 RJ25 to DB9M serial adapter

Summary of Contents for p900w















































































































































































































































Search results

Summary of Contents for p900w

Reviews:

Related manuals for p900w

Brands by name

Popular brands

Brother p900w, User Manual

Search results

Summary of Contents for p900w

Reviews:

Related manuals for p900w

Brands by name

Popular brands