Brother p900w, User Manual

Page: 161 / 238

151
16
16
You can reset the internal memory of your P-touch Label Printer to clear all saved label files, or if the P-touch
Label Printer is not operating correctly.
Resetting All Settings to the Factory Settings Using the
P-touch Label Printer Buttons
16
All text, format settings, option settings and stored label files are cleared when you reset the P-touch Label
Printer (including language and unit settings).
To reset the P-touch Label Printer, perform the following procedure.
a
Turn off the P-touch Label Printer.
b
Press and hold the (Power) and (Feed&Cut) buttons for more than three seconds.
The (Status) indicator flashes in green and the (Power) indicator lit in orange.
c
While holding the (Power) button, press the (Feed&Cut) button as follows:
 Press two times to reset the communication settings to the factory settings.
 Press four times to reset the communication settings to the factory settings. However, [ APIPA ] is set
to [ OFF ].
 Press six times to reset the communication settings and device settings to the factory settings. Also,
the transferred data from the computer is deleted.
d
Release the (Power) button.
The (Status) indicator flashing three times in green and the (Power) indicator flashing three times
in orange.
Resetting Data Using the Printer Setting Tool
16
You can use the Printer Setting Tool from a computer to perform the following operations for the P-touch
Label Printer:
 Deleting the templates and databases
 Deleting the print log
 Resetting Wi-Fi settings
 Resetting printer settings to factory settings
For more information, see Changing the P-touch Label Printer Settings on page 26.
Resetting the P-touch Label Printer
16