Using the Touch Panel Display (Optional:PA-TDU-003) (PT-P950NW Only)
204
24
Setting the Administrator Password
24
A password can be set so that basic settings specified by pressing [
] (admin key) cannot be accessed
easily. If a password is set, each time [
] (admin key) is pressed, a password must be entered. Access to
these parameters can be restricted by setting a password.
a
Press [
] (admin key).
b
Press [
b
], select [
Security
], and then press [
OK
].
c
Press [
b
], select [
Admin Password
], and then press [
OK
].
d
Press [
b
], select [
On
], and then press [
OK
].
The password input screen appears.
e
Type in the 4-digit password, and then press [
OK
].
The password is set.
Note
• This parameter can be accessed only when touch panel A (basic control panel) is set.
• After a password has been set, the password input screen appears when [
] (admin key) is pressed.
Type in the specified 4-digit password, and then press [
OK
].
• To cancel the password settings, press [
] (admin key), type in the password to display the parameters,
and then set [
Admin Password
] to [
Off
].
• If you do not remember the password, use [
Device settings
] in the Printer Setting Tool to return all
settings to factory settings or specify the password again and apply it. For more information, see
Summary of Contents for p900w
Page 193: ...Network Terms and Information 183 21 PEAP EAP TTLS EAP TLS For user ID ...
Page 238: ......
