Brother P-Touch PTE300VP User Manual Download

Page: 23 / 57

Power Supply

GETTING STARTED

Rechargeable Li-ion Battery

Labelling System

• Charging current: 500 mA
• Charging voltage: up to 8.2 V (Maximum)

Rechargeable Li-ion Battery Characteristics

Understanding the properties of the rechargeable Li-ion battery will allow you to optimize its
usage.
• Using or storing the rechargeable Li-ion battery in a location exposed to high or low

temperatures may accelerate its deterioration. In particular, using a rechargeable Li-ion battery

with a high charge (90% or more) in a location exposed to high temperatures will considerably
accelerate battery deterioration.

• Using the labelling system while the rechargeable Li-ion battery is installed and charging may

accelerate the battery's deterioration. If using the labelling system when the rechargeable Li-ion
battery is installed, disconnect the AC adapter.

• If the labelling system will not be used for longer than one month, remove the rechargeable Li-

ion battery from the labelling system when its charge is 50% or less, and then store the battery
in a cool place away from direct sunlight.

• If the rechargeable Li-ion battery will not be used for a long period of time, we recommend

charging it every 6 months.

• If you touch a part of the labelling system while the Li-ion battery is charging, that part of the

labelling system may feel warm. This is normal, and the labelling system may be used safely. If

the labelling system becomes extremely hot, discontinue use.

Specifications

• Charging time: Approximately 6 hours when charged by a AC adapter (AD-E001).
• Nominal Voltage: DC 7.2 V
• Nominal Capacity: 1850 mAh

Surroundings temperature range

Charge

C (104

Standard discharge current 1.9 A

C (140

Maximum discharge current 2.5 A

C (140

Shipped battery

Less than 1 month

-20

C - 50

C(-4

F - 122

Less than 3 month

-20

C - 40

C(-4

F - 104

Less than 1 year

-20

C - 20

C(-4

F - 68

Charging Parameters

Maximum charging voltage

8.2 Vdc

Maximum charging current

1330 mA

www.calcert.com

[email protected]

1.888.610.7664

Summary of Contents for P-Touch PTE300VP


























































Search results

Summary of Contents for P-Touch PTE300VP

Reviews:

Related manuals for P-Touch PTE300VP

Brands by name

Popular brands

Brother P-Touch PTE300VP, User Manual

Search results

Summary of Contents for P-Touch PTE300VP

Reviews:

Related manuals for P-Touch PTE300VP

Brands by name

Popular brands