Brother P-Touch PTE300VP Page 48 User Manual Download

Page: 48 / 57



RESETTING & MAINTAINI

YOUR

-TOUCH LABELLING SYSTEM

Maintenance

Your P-touch labelling system should be cleaned on a regular basis to maintain its

performance and life span.

Cleaning the Unit

Wipe any dust and marks from the main unit using a soft, dry cloth.

Use a slightly dampened cloth on difficult to remove marks.

Cleaning the Print Head

Streaks or poor quality characters on printed labels generally

indicates that the print head is dirty. Clean the print head using a

cotton swab or the optional print head cleaning cassette (TZe-CL4).

Cleaning the Tape Cutter

Tape adhesive can build up on the cutter blade after repeated use,

damaging the blade which may result in the tape jamming in the

cutter.

Maintenance

Always remove the batteries and disconnect the AC adapter before cleaning the P-touch labelling
system.

Do not use paint thinner, benzene, alcohol or any other organic solvent. These may deform the
case or damage the appearance of your P-touch labelling system.

• Do not touch the print head directly with your bare hands.
• Refer to the instructions provided with the print head cleaning

cassette for directions on how to use it.

• About once every year, wipe the cutter blade using a cotton swab

moistened with isopropyl alcohol (rubbing alcohol).

• Do not touch the cutter blade directly with your bare hands.

Print head

www.calcert.com

[email protected]

1.888.610.7664

Summary of Contents for P-Touch PTE300VP


























































Search results

Summary of Contents for P-Touch PTE300VP

Reviews:

Related manuals for P-Touch PTE300VP

Brands by name

Popular brands

Brother P-Touch PTE300VP, User Manual

Search results

Summary of Contents for P-Touch PTE300VP

Reviews:

Related manuals for P-Touch PTE300VP

Brands by name

Popular brands