Brother P-Touch PTE300VP User Manual Download

Page: 10 / 57



TRO

DUC

Safety Precautions

AC Adapter

Follow these guidelines to avoid fire, damage, electric shock, failure or the risk of injury.

Make sure that the plug is fully inserted

into the power outlet. Do not use an

outlet that is loose.

Always use the specified AC adapter,

and always plug the AC adapter into an

electrical outlet with the specified

voltage (120V). Failure to do so may

result in injury to yourself or others, or

damage to the labelling system or other

property. Brother does not assume, any

responsibility for any accident or

damage resulting from not using the

specified AC adapter and adapter cord.

DO NOT connect the AC adapter or

adapter cord to other products.

DO NOT touch the AC adapter and the

P-touch labelling system during a

thunderstorm. There may be a remote

risk of electric shock from lightning

when the labelling system is used

during a thunderstorm.

DO NOT touch the AC adapter or power

plug with wet hands.

DO NOT use the AC adapter in places

with high humidity or moisture, such as

bathrooms.

DO NOT use a damaged adapter cord

or power plug.

DO NOT place heavy objects on,

damage, or modify the adapter cord or

plug. Do not forcibly bend or pull the

adapter cord.

DO NOT drop, hit, or otherwise damage

the AC adapter.

Tape Cutter

DO NOT touch the blade of the cutter

unit.

WARNING

www.calcert.com

[email protected]

1.888.610.7664

Summary of Contents for P-Touch PTE300VP


























































Search results

Summary of Contents for P-Touch PTE300VP

Reviews:

Related manuals for P-Touch PTE300VP

Brands by name

Popular brands

Brother P-Touch PTE300VP, User Manual

Search results

Summary of Contents for P-Touch PTE300VP

Reviews:

Related manuals for P-Touch PTE300VP

Brands by name

Popular brands