Brother P-Touch PTE300VP User Manual Download

Page: 28 / 57



GET

G S

ARTED

Setting Language and Unit

Language

Press the

Menu

key to display the Setup menu, select "Language" using the or

key, and then press the

Enter

key.

Select a language for menu commands and messages shown on the LCD display by

using the or key.

The language can be selected from "

eština", "Dansk", "Deutsch", "English", "Español",

"Français", "Hrvatski", "Italiano", "Magyar", "Nederlands", "Norsk", "Polski",

"Português", "Português(Brasil)", "Român

", "Slovenski", "Slovenský", "Suomi",

"Svenska" or "Türkçe".

Press the

Enter

key.

Unit

Press the

Menu

key to display the Setup menu, select "Unit" using the or key, and

then press the

Enter

key.

Select a unit for dimensions shown on the LCD display by using the or key.

Either "mm" or "inch" can be selected.

Press the

Enter

key.

Setting Language and Unit

Press the

Escape

key to return to the previous step.

The default setting is "mm".
Press the

Escape

key to return to the previous step.

www.calcert.com

[email protected]

1.888.610.7664

Summary of Contents for P-Touch PTE300VP


























































Search results

Summary of Contents for P-Touch PTE300VP

Reviews:

Related manuals for P-Touch PTE300VP

Brands by name

Popular brands

Brother P-Touch PTE300VP, User Manual

Search results

Summary of Contents for P-Touch PTE300VP

Reviews:

Related manuals for P-Touch PTE300VP

Brands by name

Popular brands