Brother P-Touch PTE300VP User Manual Download | Manualshive

Page: 14 / 57

background image

1

2

3

4

5

6

7

8

9

12



IN

TRO

DUC

TI

O

N

Symbols Used in this Guide

• DO NOT expose the tape cassettes to direct sunlight, high temperatures, high humidity, or

dust. Store tape cassettes in a cool, dark place. Use the tape cassettes soon after opening

the tape cassette package.

• Markings made with oil-based or water-based ink may be visible through a label affixed

over them. To hide the markings, use two labels layered on top of each other or use a dark-

colored label.

• Any data stored in memory will be lost due to failure or repair of the P-touch labelling

system, or if the battery expires.

• When power is disconnected for more than two minutes, all text and format settings will be

cleared. Any text files stored in the memory will also be cleared.

• The length of the printed label may differ from the displayed label length.
• A protective clear plastic sticker is placed over the display during manufacturing and

shipping. This sticker should be removed prior to use.

• You can also use Heat Shrink Tube in this model. Check the Brother website

or further information. You may not be able to use some print frame,

or font settings when using Heat Shrink Tube.

• The P-touch labelling system is not equipped with a charging feature for Ni-MH

rechargeable batteries.

• The printed label may differ from the image that appears on the LCD.
• Note that Brother Industries, Ltd. does not assume responsibility for any damage or injury

arising from the failure to follow the precautions listed in this manual.

• We strongly recommend that you read this User's Guide carefully before using your

P-touch labelling system, and then keep it nearby for future reference.

The following symbols are used throughout this guide to indicate additional information.

Symbols Used in this Guide

: This symbol indicates information or directions that may result in damage or injury if

ignored, or operations that will result in errors.

:

This symbol indicates information or directions that may help you understand and use

the P-touch labelling system more efficiently.

www.calcert.com

[email protected]

1.888.610.7664

0

5

10

15

20

25

30

«
...
12
13
14
15
16
...
»

Summary of Contents for P-Touch PTE300VP


























































Reviews:

No comments

Related manuals for P-Touch PTE300VP

Brand: Saeco Pages: 184

Brand: Sanremo Pages: 5

Brand: M&V S.r.l. Pages: 24

Brand: Welbilt Pages: 32

Brand: camry Pages: 76

Brand: BOSKA Pages: 9

Brand: Havso Pages: 20

Brand: Bellucci Pages: 21

Brand: Dacor Pages: 16

Brand: Klarstein Pages: 64

Brand: Singer Pages: 24

Brand: Philips Pages: 2

Saeco Xelsis SM7583

Brand: Philips Pages: 2

Brand: Philips Pages: 4

Brand: Philips Pages: 6

Senseo Excel HD7840

Brand: Philips Pages: 7

Saeco Intelia HD8752

Brand: Philips Pages: 3

Saeco HD8645/57

Brand: Philips Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands