Brother HL-L8250CDN, Service Manual

Page: 44 / 386

2-21
Confidential
Cartridge
Error Put the Black (BK)
Toner Cartridge
back in.
The new toner sensor of the
toner cartridge (Black) could not
detect a new cartridge properly. 4F01 2-51
Put the Cyan (C)
Toner Cartridge
back in.
The new toner sensor of the
toner cartridge (Cyan) could not
detect a new cartridge properly. 4F04 2-51
Put the Magenta
(M) Toner
Cartridge back in.
The new toner sensor of the
toner cartridge (Magenta) could
not detect a new cartridge
properly. 4F03 2-51
Put the Yellow (Y)
Toner Cartridge
back in.
The new toner sensor of the
toner cartridge (Yellow) could not
detect a new cartridge properly. 4F02 2-51
Condensation Turn the power
switch off and open
the Front Cover.
Wait 30 minutes,
and then turn it on
again.
Condensation occurred in the
machine. 1400 2-46
Cooling
Down
Wait for a while
The internal temperature sensor
or side thermistor of the fuser unit
detected a temperature higher
than the specified value. 6801 2-57
Cover is
Open
Close the Front
Cover.
The front cover sensor detected
that the front cover was open. 6001 2-53
Close the Fuser
Cover which can be
found behind the
Back Cover of the
machine.
The eject sensor detected that
the fuser cover was open. 6004 2-53
DIMM Error -
Faulty DIMM is installed or DIMM
is not properly installed. --- 4.10.1
Direct Print No File Neither files nor directories exist
in the USB flash memory. --- 4.11.2
Drum ! Slide the Blue tab
on Drum Unit.
Electric discharge that may be
caused by dirt on the corona wire
of the drum unit was detected. 6A00 2-58
Drum End
Soon
-
Number of the drum unit rotations
reaches the upper limit soon. 4000 2-47
Drum Stop Replace the Drum
Unit.
Electric discharge was detected
when the number of the drum unit
rotations had become more than
twice of the upper limit. 6B01 2-58
Error Message
State
Error
Codes
Refer
to:
1st line 2nd line