manualshive.com logo in svg

Brother HL-L8250CDN, Service Manual

Share
Download
Brother HL-L8250CDN Service Manual Download Page 331

5-48

Confidential

1.3.24 Printout of maintenance information (Function code 77)

<Function>

This function is used to print the maintenance information, such as the remaining amount of 
consumables, number of replacements, and counter values.

<Operating procedure>

■

Maintenance information

Fig. 5-16

Model without touch panel

Model with touch panel

(1) Press the

or

key to display 

“MAINTENANCE 77” on the LCD in the 
initial state of the maintenance mode. 
Then, press the 

OK

 key. Maintenance 

information starts to be printed.

(2) When printing is finished, the machine 

returns to the initial state of the 
maintenance mode.

(1) Press the 

7

 key twice in the initial state 

of the maintenance mode. Maintenance 
information starts to be printed.

(2) When printing is finished, the machine 

returns to the initial state of the 
maintenance mode.

Summary of Contents for HL-L8250CDN



































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands