Brother DreamWeaver XE VM6200D Operation Manual Download Page 267

Page: 267 / 324

EDITING PATTERNS

Em
br

oide

Ed
it

Embroidering

E-73

Vertical direction

Horizontal direction

Repeating and deleting vertical keys

Repeating and deleting horizontal keys

Spacing keys

→

The pattern direction indicator will change
depending on the direction selected.

Use

to repeat the pattern on top and

to repeat the pattern at the bottom.

To delete the top pattern, press

To delete the bottom pattern, press

Adjust the spacing of the repeated pattern.

To widen spacing, press

To tighten spacing, press

Press

to change a repeated pattern back to

one single pattern.

Complete repeated patterns by repeating
steps

through

Press

to finish repeating.

Memo

• You can only adjust the spacing of patterns

included in the red frame.

Memo

• When there are two or more patterns, all

patterns will be grouped together as one
pattern in the red frame.

• When changing the direction in which the

pattern will be repeated, all of the patterns
in the red frame will automatically be

grouped as one repeating unit. Press

to change a repeated pattern back to one
single pattern. See the following section on
how to repeat one element of a repeated
pattern.

Summary of Contents for DreamWeaver XE VM6200D





































































































































































































































































































































Search results

Summary of Contents for DreamWeaver XE VM6200D

Reviews:

Related manuals for DreamWeaver XE VM6200D

Brands by name

Popular brands

Brother DreamWeaver XE VM6200D, Operation Manual

Search results

Summary of Contents for DreamWeaver XE VM6200D

Reviews:

Related manuals for DreamWeaver XE VM6200D

Brands by name

Popular brands