Brother DreamWeaver XE VM6200D, Operation Manual

Page: 80 / 324

USING SENSOR FUNCTIONS WITH SEWING STITCH
B-78
Specifying the Needle Drop
Position With the Sensor Pen
a
Turn on the machine.
b
Press .
c
Select a stitch pattern.
d
Press .
→
The sensor functions screen appears.
e
Press .
→
The reference position setting screen appears, and
the red guideline marker flashes at the machine’s
sewing position.
f
With the sensor pen, touch the location to
be specified as the needle drop position.
→
The guideline marker moves to the touched position
and flashes.
→
The distance from the left reference line to the
touched position appears in the reference position
setting screen.
→
The stitch preview on the upper left side of the
screen is updated according to the specified setting.
a
Press to return the needle drop position to its
default setting.
b
Press to stop specifying a setting with the sensor
pen.
Note
• If is not available, the sewing
reference position cannot be specified with
the selected stitch pattern. Select a different
stitch pattern.
Note
• The following error message appears if the
area outside of the sensor pen touch range
is touched. Press , and then touch
within the sensor pen touch range.
Memo
• The position can be precisely adjusted by
touching the adjustment areas with the
sensor pen.
• To change the setting, use the sensor pen
to touch the desired location for the
reference position.
a
b