Brother DreamWeaver XE VM6200D Operation Manual Download Page 111

Page: 111 / 324

SELECTING UTILITY STITCHES

tility
S

titc
h

Sewing

S-23

■

Retrieving Saved Settings

Select a stitch.

Press .

→

The memory function screen appears.

Press .

Press the numbered key of the settings to be
retrieved.

Press

to return to the original screen without

retrieving settings.

Numbered keys

Press .

→

The selected settings are retrieved. Press

return to the original screen.

Memo

• When a stitch is selected, the last settings

retrieved are displayed. The last settings
retrieved are retained even if the machine
was turned off or a different stitch was
selected.

Memo

• To save new settings when there are

already 5 sets of settings saved for a stitch,

press

. Press the numbered key of the

setting to be deleted. Press

, press

and then

. The new setting will

be saved in place of the recently deleted
setting.

• You can delete all the saved settings by

pressing .

Summary of Contents for DreamWeaver XE VM6200D





































































































































































































































































































































Search results

Summary of Contents for DreamWeaver XE VM6200D

Reviews:

Related manuals for DreamWeaver XE VM6200D

Brands by name

Popular brands

Brother DreamWeaver XE VM6200D, Operation Manual

Search results

Summary of Contents for DreamWeaver XE VM6200D

Reviews:

Related manuals for DreamWeaver XE VM6200D

Brands by name

Popular brands