Brother DreamWeaver XE VM6200D Operation Manual Download Page 56

Page: 56 / 324

UPPER THREADING

B-54

■

Using the Vertical Spool Pin

Use the vertical spool pin when using an irregularly
shaped thread spool, and when sewing or
embroidering with metallic thread.

Insert the vertical spool pin onto the bobbin
winder shaft.

Install the spool felt and the thread spool in
that order, and then thread the upper
thread.

Bobbin winder shaft

Vertical spool pin

Spool felt

Thread spool

Memo

• When setting the thread spool, set it so that

the thread winds off from the front of the
spool.

• If using metallic thread, we recommend that

you use a 90/14 home sewing machine
needle.

• This method keeps the thread from twisting

as it comes off the spool pin.

d
c

Summary of Contents for DreamWeaver XE VM6200D





































































































































































































































































































































Search results

Summary of Contents for DreamWeaver XE VM6200D

Reviews:

Related manuals for DreamWeaver XE VM6200D

Brands by name

Popular brands

Brother DreamWeaver XE VM6200D, Operation Manual

Search results

Summary of Contents for DreamWeaver XE VM6200D

Reviews:

Related manuals for DreamWeaver XE VM6200D

Brands by name

Popular brands