Brother DreamWeaver XE VM6200D Operation Manual Download Page 146

Page: 146 / 324

SEWING THE STITCHES

S-58

Select

and attach monogramming foot

“N”.

Set the needle in the fabric at the sewing
start point, and sew seam “1” as shown.

Start Point

Select

and sew seam “2” as shown.

The fabric will move sideways, guide the fabric by
hand to keep sewing straight.

Select

and sew seam “3” as shown.

→

The fabric feeds forward while stitching backward.

Select

and sew seam “4” as shown.

→

The seam will be connected to the starting point of
seam 1.

Zipper Insertion

■

Centered Zipper

Use for bags and other such applications.

Select .

Memo

• For details on each stitch, refer to the

“STITCH SETTING CHART” on page S-62.

Memo

• For details on each stitch, refer to the

“STITCH SETTING CHART” on page S-62.

Note

• Make sure you sew using the middle needle

position.

Summary of Contents for DreamWeaver XE VM6200D





































































































































































































































































































































Search results

Summary of Contents for DreamWeaver XE VM6200D

Reviews:

Related manuals for DreamWeaver XE VM6200D

Brands by name

Popular brands

Brother DreamWeaver XE VM6200D, Operation Manual

Search results

Summary of Contents for DreamWeaver XE VM6200D

Reviews:

Related manuals for DreamWeaver XE VM6200D

Brands by name

Popular brands