Brother DreamWeaver XE VM6200D Operation Manual Download Page 165

Page: 165 / 324

SEWING STITCH PATTERNS

Cha

cte

r/D

titc
he
s

Sewing

S-77

Attach monogramming foot “N” and sew
the pattern.

Compare the finished pattern to the
illustration of the correct pattern below.

Press

, and then adjust the pattern

with the “Fine Adjust Verti.” or “Fine
Adjust Horiz.” displays.

If the pattern is bunched:

Press

in the “Fine Adjust Verti.” display.

→

The displayed value increases each time the button
is pressed and the pattern will lengthen.

If the pattern has gaps:

Press

in the “Fine Adjust Verti.” display.

→

The displayed value decreases each time the button
is pressed and the pattern will shorten.

If the pattern is skewed to the left:

Press

in the “Fine Adjust Horiz.” display.

→

The displayed value increases each time the button
is pressed and the pattern will slide to the right.

If the pattern is skewed to the right:

Press

in the “Fine Adjust Horiz.” display.

→

The displayed value decreases each time the button
is pressed and the pattern will slide to the left.

Sew the stitch pattern again.

If the stitch pattern still comes out poorly, make
adjustments again. Adjust until the stitch pattern
comes out correctly.

Press

to return to the original screen.

Memo

• You can sew with the setting screen on the

display.

Summary of Contents for DreamWeaver XE VM6200D





































































































































































































































































































































Search results

Summary of Contents for DreamWeaver XE VM6200D

Reviews:

Related manuals for DreamWeaver XE VM6200D

Brands by name

Popular brands

Brother DreamWeaver XE VM6200D, Operation Manual

Search results

Summary of Contents for DreamWeaver XE VM6200D

Reviews:

Related manuals for DreamWeaver XE VM6200D

Brands by name

Popular brands