Brother DreamWeaver XE VM6200D Operation Manual Download Page 162

Page: 162 / 324

SELECTING STITCH PATTERNS

S-74

■

Adjusting the Character Spacing

The space between the characters can be adjusted.

Press .

Press

to display

on the screen.

→

The character spacing window appears.

Press

to adjust character spacing.

Press

to increase the character spacing and

press

to decrease the character spacing.

Example:

Each setting equals a specific distance between
characters.

Value

0.18

0.36

0.54

0.72

0.9

1.08

1.26

1.44

1.62

1.8

Memo

• The default setting is “0”. No number less

than “0” can be set.

• Changing character spacing by this

method, pertains to all characters. Spacing
changes are valid not only while entering
characters but also before and after the
entering of characters.

Summary of Contents for DreamWeaver XE VM6200D





































































































































































































































































































































Search results

Summary of Contents for DreamWeaver XE VM6200D

Reviews:

Related manuals for DreamWeaver XE VM6200D

Brands by name

Popular brands

Brother DreamWeaver XE VM6200D, Operation Manual

Search results

Summary of Contents for DreamWeaver XE VM6200D

Reviews:

Related manuals for DreamWeaver XE VM6200D

Brands by name

Popular brands