Brother DCP-9045CDN Service Manual Download Page 380

Page: 380 / 491

Confidential

5-20

1.4.13 EEPROM Customizing (User-accessible) (Function code 52)

<Function>

This function allows users to customize the EEPROM settings such as language, function
settings or worker switch settings.

Note:

This function is applicable to “France and surrounding countries”, “Pan-Nordic”, “Oceania” and
“Iberia” areas only.

<Operating Procedure>

(1) Press

the

Menu

Black Start

and

Menu

buttons in this order in the ready state.

The “0” will appear on the LCD.

(2) Press

the

and

buttons in this order.

The “Set Country / Press OK” will appear on the LCD.

(3) Press

the

button.

The country name will appear on the LCD.

Note:

The country name indicated on the LCD varies depending on the area (code input in

Function code 74

) as shown in the table below.

France and
surrounding
countries

Oceania Pan-Nordic

Iberia

France Australia

Norge

España

België / Belgique New Zealand

Suerige

Portugal

Nederland

Suomi

Danmark

Others

(4) Press

the or button to display the country name where the machine is used. Press

the

button while the country name is being indicated.

The EEPROM is customized, and the machine returns to the ready state.

Summary of Contents for DCP-9045CDN












































































































































































































































































































































































































































































































Search results

Summary of Contents for DCP-9045CDN

Reviews:

Brands by name

Popular brands

Brother DCP-9045CDN, Service Manual

Search results

Summary of Contents for DCP-9045CDN

Reviews:

Brands by name

Popular brands