Brother DCP 7065DN Service Manual Download Page 309

Page: 309 / 337

5-43

Confidential

2.5

Drum Cleaning

■

Drum cleaning function overview

Install the plain paper into the manual feed slot and perform the cleaning of the drum.

<Operating Procedure>

(1) Open the back cover while the machine is in the ready state.

(2) Press the

Clear

and

Menu

buttons at the same time. “Insert the blank paper into the

Manual feed slot.” is displayed on the LCD.

(3) Install the paper into the manual feed slot.

(4) The drum cleaning is performed. “Please Wait” is displayed on the LCD.

(5) The paper is ejected from the back cover, and the drum cleaning is completed

(6) Close the back cover, and the machine goes back to the ready state.

Note:

• When the error of jam during the drum cleaning, drum cleaning mode is canceled

automatically and becomes the error display.

Summary of Contents for DCP 7065DN


















































































































































































































































































































































Search results

Summary of Contents for DCP 7065DN

Reviews:

Brands by name

Popular brands

Brother DCP 7065DN, Service Manual

Search results

Summary of Contents for DCP 7065DN

Reviews:

Brands by name

Popular brands