Brother DCP 7065DN Service Manual Download Page 273

Page: 273 / 337

5-7

Confidential

1.4.5

Monochrome image quality test pattern (Function code 09)

<Function>

This function allows you to print various monochrome test patterns and check the quality and
if there is any image loss.

<Operating Procedure>

(1) Press the

and

buttons in this order in the initial state of the maintenance mode.

In the case of the model without the numeric keys; Press the

button. The

“MAINTENANCE 09” appears on the LCD. Then press the

button.

(2) Printing of the monochrome image quality test pattern (see the figure below) starts, and

when printing is finished, the machine beeps for one second and returns to the initial
state of the maintenance mode.

Fig. 5-2

Summary of Contents for DCP 7065DN


















































































































































































































































































































































Search results

Summary of Contents for DCP 7065DN

Reviews:

Brands by name

Popular brands

Brother DCP 7065DN, Service Manual

Search results

Summary of Contents for DCP 7065DN

Reviews:

Brands by name

Popular brands