Brother DCP 7065DN Service Manual Download Page 276

Page: 276 / 337

5-10

Confidential

<Operating Procedure>

(1) Press the

and

buttons in this order in the initial state of the maintenance mode.

In the case of the model without the numeric keys; Press the

button. The

“MAINTENANCE 10” appears on the LCD. Then press the

button.

The machine displays “WSW00” on the LCD and becomes ready to accept a worker
switch number.

(2) Enter the desired number from the worker switch numbers (01 through 78). The

following appears on the LCD. In the case of the model without the numeric keys; Press
the

button. Select the desired worker switch number.

(3) Enter a value to be set (0 or 1) using the

and

buttons. In the case of the model

without the numeric keys; If press the

button, it is changed to “1”. And press the

button, it is changed to “0”. Select the value by this method.

(4) Press the

button. This operation saves the newly entered selector values onto the

EEPROM and readies the machine for accepting a worker switch number.

(5) Repeat steps (2) through (4) until the modification for the desired worker switches is

completed.

(6) When the

Stop/Exit

button is pressed, the machine beeps for one second and returns to

the initial state of the maintenance mode.

WSW71

Reserved (Change of the setting is prohibited)

WSW72

Reserved (Change of the setting is prohibited)

WSW73

Reserved (Change of the setting is prohibited)

WSW74

ADF stop control

WSW75

Paper feeding parameter for turning the document counter when the

machine takes action duplex scanning

WSW76

The limited number of the documents in reverse for paper ejection of the

simplex scanning from ADF

WSW77

The limited number of the documents in reverse for paper ejection of the

duplex scanning from ADF

WSW78

Recording stop function when the drum reaches the end of life

Note:

• To cancel this operation and return to the machine to the initial state of the maintenance

mode during the above procedure, press the

Stop/Exit

button.

• If there is a pause of more than one minute after a single-digit number is entered for

double-digit worker switch numbers, the machine will automatically return to the initial
state of the maintenance mode.

WSW No.

Function

WSWXX = 0 0 0 0 0 0 0 0

Selector 1

Selector 2

Summary of Contents for DCP 7065DN


















































































































































































































































































































































Search results

Summary of Contents for DCP 7065DN

Reviews:

Brands by name

Popular brands

Brother DCP 7065DN, Service Manual

Search results

Summary of Contents for DCP 7065DN

Reviews:

Brands by name

Popular brands