manualshive.com logo in svg

Brother DCP 7065DN, Service Manual

Share
Download
Brother DCP 7065DN Service Manual Download Page 267

5-1

Confidential

1. MAINTENANCE MODE

The maintenance mode is exclusively designed for the checking, setting and adjustments of 
the machine by using the buttons on the control panel. The EEPROM can be customized 
according to the destination of the machine. Moreover, the operational check of the LCD, 
operation panel board, and sensors, print test, display of the log information and error codes, 
and change of the worker switches (WSW) can be performed.

1.1

How to Enter the Maintenance Mode

<Operating Procedure>

(1) Press the 

Menu

 button and then the 

Start

 button while the machine is in the ready state. 

Next, press the 

 button four times to enter the maintenance mode.

(2) The machine beeps for one second and displays “

” on the LCD, 

indicating that it is placed in the initial state of the maintenance mode, a mode in which 
the machine is ready to accept entry from the buttons.

(3) To select any of the maintenance mode functions shown in the 

next page

, enter the 

maintenance mode that you want to use using the buttons.

1.2

How to Enter the End User-accessible Maintenance Mode

Basically, the maintenance-mode functions listed in the next page should be accessed by 
service personnel only. However, you can allow end users to access some of these under the 
guidance of service personnel by phone, for example.
The end user-accessible functions are shaded in the table given on the 

next page

. (codes 

06, 

09, 10, 11, 12, 25, 43, 45, 52, 53, 54, 66, 68, 71, 72, 80, 82, 87, 88

 and 

91

)

Function code 10 accesses the firmware switches, each of which has eight selectors.
The service personnel should instruct end users to follow the procedure given below.

<Operating Procedure>

(1) Press the 

Menu

, 

Start

, 

Menu

 and 

 buttons in this order when the machine is in the 

ready state. “MAINTENANCE 06” appears on the LCD.

(2) Press the 

 or 

 button to display the desired maintenance code on the LCD. Then 

press the 

OK

 button.

To switch the machine back to the ready state, press the 

Stop/Exit

 button. When each of the 

user-accessible functions is completed, the machine automatically returns to the ready state.

Memo:

• Operation using 

Menu

, 

*

, 

2

, 

8

, 

6

 and 

4

 buttons is also available.

Memo:

• To exit from the maintenance mode and switch to ready state, press the 

9

 button twice 

in the initial state of the maintenance mode.
In the case of the model without the numeric keys; Press the 

 or 

 button. The 

“MAINTENANCE 99” appears on the LCD. Then press the 

OK

 button, and the machine 

returns to the ready state.

• When the 

Stop/Exit

 button is pressed, the machine beeps for one second and returns 

to the initial state of the maintenance mode.

• When an incorrect maintenance mode is entered, the machine beeps for one second 

and returns to the initial state of the maintenance mode.

Summary of Contents for DCP 7065DN


















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands