manualshive.com logo in svg

Brother DCP 7065DN, Service Manual

Share
Download
Brother DCP 7065DN Service Manual Download Page 292

5-26

Confidential

1.4.17

Fine adjustment of scan start/end positions (Function code 54)

<Function>

This function allows you to adjust the scan start/end positions on the ADF and FB unit.

<Operating Procedure>

(1) Press the 

5

 and 

4

 buttons in this order in the initial state of the maintenance mode.

In the case of the model without the numeric keys; Press the 

 or 

 button. The 

“MAINTENANCE 54” appears on the LCD. Then press the 

OK

 button.

The “SCAN START ADJ.” will appear on the LCD.

(2) The “ 

 : ADF  

 : FB” will appear after two seconds. Select one of them that you want 

to adjust the start position. If you want to adjust the start position of the ADF, 
press 

 button, and if you want to adjust that of the FB unit, press 

 button.

(3) Press the 

 or 

 button to display the present compensation level for the start position. 

Compensation levels can be adjusted in 11 steps from +5 to -5 (mm).

(4) Press the 

 button to increase the correction value and the button to lower it.

When the 

Stop/Exit

 button is pressed, the machine beeps for one second and returns to 

the initial state of the maintenance mode.

(5) Set the compensation level and press the 

OK

 button. The “ACCEPTED” will appear on 

the LCD. One second later, the machine “ 

 : ADF  

 : FB” will appear on the LCD.

(6) Press the 

Stop/Exit

 button when finish the adjustment. The machine beeps for one 

second and returns to the initial state of the maintenance mode.

The correlation between the scan start/end positions and compensation levels is shown below.

Fig. 5-12

      or      button

OK

 button

Stop/Exit

 button

Stop/Exit

 button

OK

 button

button

button

5

 and 

4

 buttons select

2 seconds later

Summary of Contents for DCP 7065DN


















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands