Brocade Communications Systems ICX 7250, Hardware Installation Manual

Page: 66 / 119

6. DC power cable connector 6
7. DC power cable connector 7
8. DC power cable connector 8
LEDs
The following figure shows the LEDs on the EPS4000.
FIGURE 46 EPS4000 LEDs
1. Ex.y: Power status indicator (54 V): x= EPS4000 connector (1-8), y = Channel or port (1-2)
2. CONFIG: EPS configuration mode indicator
3. Rx.y: Power status indicator (12 V): x = EPS4000 connector (1-8), y = Channel or port (1-2)
The following table describes the functions of the EPS4000 LEDs.
TABLE 9 System Status LEDs on the EPS4000
LED State Description
E1.1 ~ E8.1 (54 V1)
E1.2 ~ E8.2 (54 V2)
Off No connection.
Green EPS4000 is delivering up to 370 W PoE power to switch.
Amber Switch is connected to this channel but EPS4000 does not have sufficient PoE power
for this channel.
Blinking amber This channel has a fault (for example, over current).
Blinking amber and
green This channel has been granted PoE power but there is a fault on the channel (for
example, over current).
R1.1 ~ R8.1 (12 V1)
R1.2 ~ R8.2 (12 V2)
Off No connection.
Green Switch is connected to this channel and EPS is ready to provide 12 V backup power for
this channel.
Installing the EPS4000
Brocade ICX 7250 Switch Hardware Installation Guide
66 53-1003898-02