FIGURE 3
ICX 7450-48P Front Panel
ICX7450-48F
This is a fixed 48-Port 1GB Ethernet SFP. It has a full wide hot-plug module slot in the front and two
full wide hot-plug module slots in the back.
FIGURE 4
ICX 7450-48P Front Panel
FIGURE 5
ICX 7450-48P Front Panel
ICX 7450 Stacking
With Release 08.0.20, the Brocade ICX 7450 supported stacking only on 1x40G modules. With
Release 08.0.30, the Brocade ICX 7450 supports stacking on 4x10G modules as well.
NOTE
The ICX 7450 can support 4X10 GF stacking from slot 2 or 1x40GQ stacking from rear ports;
however, it cannot support both in the same stack.
ICX Stacking with 1x40G Ports
Stacking is supported only on 1x40Q module when placed in rear modules 3 and 4 for 24 ports and 48
port SKUs. For 24 port units, 1x40Q module is supported in all three flexible module slots which are
Modules 2, 3 and 4; but it will not support stacking when present in slot 1. For 48 port units, 1x40Q
module is supported only on slots 2 and 3. Please refer to
Table 1
for more details.
When stacking enabled, the two stack ports configured by default are 1/3/1 and 1/4/1. The following
figure shows default stacking ports for ICX7450.
Brocade ICX 7450, Brocade ICX 7750, and Brocade ICX 7250 Stacking
8
Brocade ICX 7450, Brocade ICX 7750, and Brocade ICX 7250 Stacking Deployment Guide
53-1003581-03
