7 6 ICX7750-20QXG cc4e.2439.3700
8 5 ICX7750-20QXG cc4e.2439.2a80
9 4 ICX7750-48XGF cc4e.246d.9c80
10 3 ICX7750-48XGF cc4e.246d.9b00
11 2 ICX7750-48XGF cc4e.246d.8d80
Do you accept the unit id's (y/n)?: y
7. Once stack IDs are accepted, the stack units, except the active controller, reset so that the
assigned switch IDs become effective. By default, stack secure assigns 128 as active units' priority.
T=1m47.5: Election, was alone --> active, ID=1, pri=128, 12U(1-12), A=u1, nbr#=11
11, reason: u5: port-up, ,
T=1m50.1: Election, was active, no change, ID=1, pri=128, 12U(1-12), A=u1,
nbr#=11 11, reason: u1: stk-po-chg, ,
T=1m53.1: reset unit 2: u2 bo-id=1
T=1m53.1: reset unit 3: u3 bo-id=1
T=1m53.1: reset unit 4: u4 bo-id=1
T=1m53.1: reset unit 5: u5 bo-id=1
T=1m53.1: reset unit 6: u6 bo-id=1
T=1m53.1: reset unit 7: u7 bo-id=1
T=1m53.1: reset unit 8: u8 bo-id=1
T=1m53.1: reset unit 9: u9 bo-id=1
T=1m53.1: reset unit 10: u10 bo-id=1
T=1m53.1: reset unit 11: u11 bo-id=1
T=1m53.1: reset unit 12: u12 bo-id=1
Config changed due to add/del units. Do write mem if you want to keep it
T=1m56.1: Unit 1 loses all neighbors.
T=1m56.1: Active U1 deletes U2 and its config because it is learned.
T=1m56.1: Active U1 deletes U3 and its config because it is learned.
T=1m56.1: Active U1 deletes U4 and its config because it is learned.
T=1m56.1: Active U1 deletes U5 and its config because it is learned.
T=1m56.1: Active U1 deletes U6 and its config because it is learned.
T=1m56.1: Active U1 deletes U7 and its config because it is learned.
T=1m56.1: Active U1 deletes U8 and its config because it is learned.
T=1m56.2: Active U1 deletes U9 and its config because it is learned.
T=1m56.2: Active U1 deletes U10 and its config because it is learned.
T=1m56.2: Active U1 deletes U11 and its config because it is learned.
T=1m56.2: Active U1 deletes U12 and its config because it is learned.
8. Various settings and files are synced from the master to the newly joined units. During stack
formation, units go through various stages when they join the stack. Once units become part of the
stack and the master syncs relevant information and files to all the units, the units are set in
"READY" state.
T=2m51.8: Election, was active, no change, ID=1, pri=128, 3U(1-3), A=u1, nbr#=2
0, reason: u3: port-up, ,
T=2m52.0: Synchronize webauth files to u3
T=2m52.1: Synchronize webauth files to u2
T:2m53.2: Done hot swap: active controller u1 sets u3 to Ready.
T:2m53.3: Done hot swap: active controller u1 sets u2 to Ready.
T=2m53.8: Election, was active, no change, ID=1, pri=128, 3U(1-3), A=u1, nbr#=2
0, reason: u1: stk-po-chg, ,
Stack unit 2 Power supply 1 is up
Stack unit 2 Power supply 2 is down
Stack unit 3 Power supply 1 is up
Stack unit 3 Power supply 2 is down
Config changed due to add/del units. Do write mem if you want to keep it
T=3m1.6: Election, was active, no change, ID=1, pri=128, 3U(1-3), A=u1, nbr#=2 0,
reason: u3: port-up, ,
Config changed due to add/del units. Do write mem if you want to keep it
T=3m7.0: Election, was active, no change, ID=1, pri=128, 12U(1-12), A=u1, nbr#=11
11, reason: u12: port-up, ,
T=3m7.3: Synchronize webauth files to u5
T=3m7.4: Synchronize webauth files to u10
T=3m7.4: Synchronize webauth files to u11
T=3m7.4: Synchronize webauth files to u12
T=3m7.4: Synchronize webauth files to u4
T=3m7.6: Synchronize webauth files to u8
T=3m7.7: Synchronize webauth files to u9
T=3m7.9: Synchronize webauth files to u6
T=3m7.9: Synchronize webauth files to u7
T:3m8.7: Done hot swap: active controller u1 sets u5 to Ready.
T:3m8.8: Done hot swap: active controller u1 sets u10 to Ready.
T:3m8.9: Done hot swap: active controller u1 sets u11 to Ready.
T:3m9.0: Done hot swap: active controller u1 sets u12 to Ready.
T:3m9.1: Done hot swap: active controller u1 sets u4 to Ready.
T:3m9.2: Done hot swap: active controller u1 sets u8 to Ready.
Brocade ICX 7450, Brocade ICX 7750, and Brocade ICX 7250 Stacking
48
Brocade ICX 7450, Brocade ICX 7750, and Brocade ICX 7250 Stacking Deployment Guide
53-1003581-03
