manualshive.com logo in svg

Brocade Communications Systems ICX 7250 Stacking, Deployment Manual

Share
Download
Brocade Communications Systems ICX 7250 Stacking Deployment Manual Download Page 78

NOTE

For a 12 unit stack, the CLI command 'show stack' output displays units 10, 11, and 12 as A, B, and C
respectively and the LEDs on the switch front panel will have a digital display as 10, 11,12.

show stack detail

Enter 'show stack details' at device level. This command will display image auto copy status, stack
ports, link status, neighboring stack ports, and system uptime for each unit of the stack.

ICX7250-24P Switch#show stack detail

T=38m50.8: alone: standalone, D: dynamic cfg, S: static, A=10, B=11, C=12

ID   Type          Role    Mac Address    Pri State   Comment                   

1  S ICX7250-24P   active  cc4e.24b4.7c50 255 local   Ready

2  S ICX7250-24P   standby cc4e.24b4.7bc0 240 remote  Ready

3  S ICX7250-24P   member  cc4e.24b4.7efc   0 remote  Ready

4  S ICX7250-24    member  cc4e.24b4.8670   0 remote  Ready

5  S ICX7250-24    member  cc4e.24b4.84c0   0 remote  Ready

6  S ICX7250-24    member  cc4e.24b4.8064   0 remote  Ready

7  S ICX7250-24    member  cc4e.24b4.83a0   0 remote  Ready

8  S ICX7250-48    member  cc4e.24b4.2514   0 remote  Ready

9  S ICX7250-48    member  cc4e.24b4.2820   0 remote  Ready

10 S ICX7250-24    member  cc4e.24b4.8988   0 remote  Ready

11 S ICX7250-48P   member  cc4e.24b4.2f28   0 remote  Ready

12 S ICX7250-48P   member  cc4e.24b4.2eb0   0 remote  Ready

    active       standby                                                       

     +---+        +---+        +---+        +---+        +---+        +---+    

 -2/5| 1 |2/7==2/7| 2 |2/5==2/1| 3 |2/3==2/3| 4 |2/1==2/1| 5 |2/3==2/3| 6 |2/1=

 |   +---+        +---+        +---+        +---+        +---+        +---+   |

 |                                                                            |

 |                                                                            |

 |   +---+        +---+        +---+        +---+        +---+        +---+   |

 -2/3| C |2/1==2/1| B |2/3==2/1| A |2/3==2/1| 9 |2/3==2/3| 8 |2/1==2/1| 7 |2/3=

     +---+        +---+        +---+        +---+        +---+        +---+   

Standby u2 - protocols ready, can failover

Current stack management MAC is cc4e.24b4.7c50

Image-Auto-Copy is Enabled.

      Stack Port Status                        

Neighbors                              

Unit# Stack-port1         Stack-port2          Stack-port1         Stack-

port2        

1     up (1/2/5)          up (1/2/7-1/2/8)     U12 (12/2/3)        U2 

(2/2/7-2/2/8)   

2     up (2/2/5-2/2/6)    up (2/2/7-2/2/8)     U3 (3/2/1-3/2/2)    U1 

(1/2/7-1/2/8)   

3     up (3/2/1-3/2/2)    up (3/2/3-3/2/4)     U2 (2/2/5-2/2/6)    U4 

(4/2/3-4/2/4)   

4     up (4/2/1-4/2/2)    up (4/2/3-4/2/4)     U5 (5/2/1-5/2/2)    U3 

(3/2/3-3/2/4)   

5     up (5/2/1-5/2/2)    up (5/2/3-5/2/4)     U4 (4/2/1-4/2/2)    U6 

(6/2/3-6/2/4)   

6     up (6/2/1-6/2/2)    up (6/2/3-6/2/4)     U7 (7/2/3-7/2/4)    U5 

(5/2/3-5/2/4)   

7     up (7/2/1-7/2/2)    up (7/2/3-7/2/4)     U8 (8/2/1-8/2/2)    U6 

(6/2/1-6/2/2)   

8     up (8/2/1-8/2/2)    up (8/2/3-8/2/4)     U7 (7/2/1-7/2/2)    U9 

(9/2/3-9/2/4)   

9     up (9/2/1-9/2/2)    up (9/2/3-9/2/4)     U10 (10/2/3-10/2/4) U8 

(8/2/3-8/2/4)   

10    up (10/2/1-10/2/2)  up (10/2/3-10/2/4)   U11 (11/2/3-11/2/4) U9 

(9/2/1-9/2/2)   

11    up (11/2/1-11/2/2)  up (11/2/3-11/2/4)   U12 (12/2/1-12/2/2) U10 

(10/2/1-10/2/2)

12    up (12/2/1-12/2/2)  up (12/2/3)          U11 (11/2/1-11/2/2) U1 

(1/2/5)         

Unit# System uptime

1     38 minute(s) 50 second(s) 

2     32 minute(s) 20 second(s)                                   

3     23 minute(s) 22 second(s) 

show stack detail

78

Brocade ICX 7450, Brocade ICX 7750, and Brocade ICX 7250 Stacking Deployment Guide

53-1003581-03

Summary of Contents for ICX 7250 Stacking




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands