manualshive.com logo in svg

Brocade Communications Systems ICX 7250 Stacking, Deployment Manual

Share
Download
Brocade Communications Systems ICX 7250 Stacking Deployment Manual Download Page 50

3. To configure a stack trunk manually on a stack unit, use the stack-trunk command on every single

unit. However, in a live production environment, use the multi-stack-trunk command and use multi
stack port command to remove change a stack trunk to stack.

UNIT 1:

ICX7750-48F Router(config)#stack u 1

ICX7750-48F Router(config-unit-1)#priority 255

ICX7750-48F Router(config-unit-1)#

stack enable

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/2/1, 1/2/4 is not 

available.

UNIT 2:

ICX7750-48F Router(config)#stack unit 1

ICX7750-48F Router(config-unit-1)#priority 240

ICX7750-48FRouter(config-unit-1)#stack suggested-id 2

ICX7750-48F Router(config-unit-1)#stack enable

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/2/1, 1/2/4 is not 

available.

UNIT 3:

ICX7750-48F Router(config-unit-1)#stack suggested-id 3

ICX7750-48F Router(config-unit-1)#stack enable

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/2/1, 1/2/4 is not 

available.

UNIT 4:

ICX7750-48F Router(config)#stack unit 1

ICX7750-48F Router(config-unit-1)#stack suggested-id 4

ICX7750-48F Router(config-unit-1)#stack enable

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/2/1, 1/2/4 is not 

available.

UNIT 5

ICX7750-48C Router(config)#stack unit 1

ICX7750-48C Router(config-unit-1)#stack suggested-id 5

ICX7750-48C Router(config-unit-1)#stack enable

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/2/1, 1/2/4 is not 

available.

UNIT 6:

ICX7750-48C Router(config)#stack unit 1

ICX7750-48C Router(config-unit-1)#stack suggested-id 6

ICX7470-48C Router(config-unit-1)#stack enable

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/2/1, 1/2/4 is not 

available.

UNIT 7:

ICX7750-48C Router(config)#stack unit 1

ICX7750-48C Router(config-unit-1)#stack suggested-id 7

ICX7750-48C Router(config-unit-1)#stack enable

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/2/1, 1/2/4 is not 

available.

UNIT 8:

ICX7750-48C Router(config)#stack unit 1

ICX7750-48C Router(config-unit-1)#stack suggested-id 8

ICX7750-48C Router(config-unit-1)#stack enable

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/2/1, 1/2/4 is not 

available.

Brocade ICX 7450, Brocade ICX 7750, and Brocade ICX 7250 Stacking

50

Brocade ICX 7450, Brocade ICX 7750, and Brocade ICX 7250 Stacking Deployment Guide

53-1003581-03

Summary of Contents for ICX 7250 Stacking




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands