manualshive.com logo in svg

Brocade Communications Systems ICX 7250 Stacking, Deployment Manual

Share
Download
Brocade Communications Systems ICX 7250 Stacking Deployment Manual Download Page 19

ICX7450-48P Router(config-unit-1)#stack suggested-id 7

ICX7450-48P Router(config-unit-1)#stack enable

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/3/1, 1/4/1 is not 

available.

ICX7450-48P Router(config-unit-1)#

UNIT 8:

ICX7450-48P Router(config)#stack unit 1

ICX7450-48P Router(config-unit-1)#stack suggested-id 8

ICX7450-48P Router(config-unit-1)#stack enable

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/3/1, 1/4/1 is not 

available.

ICX7450-48P Router(config-unit-1)#

UNIT 9:

ICX7450-48P Router(config)#stack unit 1

ICX7450-48P Router(config-unit-1)#stack suggested-id 9

ICX7450-48P Router(config-unit-1)#stack enable

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/3/1, 1/4/1 is not 

available.

ICX7450-48P Router(config-unit-1)#

UNIT 10:

ICX7450-48 Router(config)#stack unit 1

ICX7450-48 Router(config-unit-1)#stack suggested-id 10

ICX7450-48 Router(config-unit-1)#stack enable

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/3/1, 1/4/1 is not 

available.

ICX7450-48 Router(config-unit-1)#

UNIT 11:

ICX7450-48P Router(config)#stack unit 1

ICX7450-48P Router(config-unit-1)#stack suggested-id 11

ICX7450-48P Router(config-unit-1)#stack enable

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/3/1, 1/4/1 is not 

available.

ICX7450-48P Router(config-unit-1)#

UNIT 12:

ICX7450-24P Router(config)#stack unit 1

ICX7450-24P Router(config-unit-1)# stack suggested-id 12

ICX7450-24P Router(config-unit-1)#stack enable

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/3/1, 1/4/1 is not 

available.

ICX7450-24P Router(config-unit-1)#

5. After configuration, connect the devices in a stack topology. The active controller retains its ID. The

rest of the units are assigned unique ID numbers depending on the sequence in which they are
connected or depending on the stack suggest-ID configured. With the exception of the active
controller, the rest of the units reset; upon boot up, the stack is formed.

ICX7450-24 Router#show stack

T=8m39.6: alone: standalone, D: dynamic cfg, S: static, A=10, B=11, C=12

ID   Type          Role    Mac Address    Pri State   Comment                   

1  S ICX7450-24G   active  cc4e.246c.ffd0 128 local   Ready

2  D ICX7450-48G   standby cc4e.246d.1c78   0 remote  Ready

3  D ICX7450-48G   member  cc4e.246d.1b78   0 remote  Ready

4  D ICX7450-48G   member  cc4e.246d.1df8   0 remote  Ready

5  D ICX7450-48P   member  cc4e.2489.8640   0 remote  Ready

6  D ICX7450-48GF  member  cc4e.246d.1478   0 remote  Ready

7  D ICX7450-48P   member  cc4e.2489.b388   0 remote  Ready

8  D ICX7450-48P   member  cc4e.2489.b188   0 remote  Ready

9  D ICX7450-48P   member  cc4e.246d.2938   0 remote  Ready

10 D ICX7450-48G   member  cc4e.246d.1838   0 remote  Ready

11 D ICX7450-48P   member  cc4e.246d.23b8   0 remote  Ready

12 D ICX7450-24P   member  cc4e.246d.0520   0 remote  Ready

    active       standby                                                       

Brocade ICX 7450, Brocade ICX 7750, and Brocade ICX 7250 Stacking

Brocade ICX 7450, Brocade ICX 7750, and Brocade ICX 7250 Stacking Deployment Guide

19

53-1003581-03

Summary of Contents for ICX 7250 Stacking




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands