manualshive.com logo in svg

Brocade Communications Systems ICX 7250 Stacking, Deployment Manual

Share
Download
Brocade Communications Systems ICX 7250 Stacking Deployment Manual Download Page 27

Detailed Steps

1. Units should boot up using the same software image.
2. Configure 'default-ports 1/2/1 1/2/3' on all the units. Write memory and reload.

24 Router>enable

No password has been assigned yet...

ICX7450-24 Router#con t

ICX7450-24 Router(config)#stack unit 1

ICX7450-24 Router(config-unit-1)#default-ports 1/2/1 1/2/3

Reload required.  Please write memory and then reload or power cycle.

ICX7450-24 Router(config-unit-1)#

ICX7450-24 Router(config-unit-1)#

ICX7450-24 Router(config-unit-1)#end

ICX7450-24 Router#

ICX7450-24 Router#Flash Memory Write (8192 bytes per dot) .

Write startup-config done.

Copy Done.

ICX7450-24 Router#

ICX7450-24 Router#

ICX7450-24 Router#rel

Sent SIGTERM to all processesn'): 

Sent SIGKILL to all processes

Requesting system reboot

Restarting system.

3. Upon boot up configure stack trunks on all the units. On a unit intended to be active controller,

configure priority 255 and intended to be standby configure priority 240. User can choose to have
same priority for active and standby which is useful in case of failover.

4. Configure stack suggested-id on the intended member units. In the following example, unit 1 is

intended active and unit 12 is intended stby and rest of the units are intended member units.

5. Configure 'stack enable' on all the units.

UNIT 1:

ICX7450-24 Router#configure terminal

ICX7450-24 Router(config)#stack unit 1

ICX7450-24 Router(config-unit-1)#stack-trunk 1/2/1 to 1/2/2

ICX7450-24 Router(config-unit-1)#stack-trunk 1/2/3 to 1/2/4

ICX7450-24 Router(config-unit-1)#priority 255

ICX7450-24 Router(config-unit-1)#stack enable

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/2/1, 1/2/3 is not 

available.

ICX7450-24 Router(config-unit-1)#

UNIT 2:

ICX7450-48 Router#configure terminal

ICX7450-48 Router(config)#stack unit 1

ICX7450-48 Router(config-unit-1)#stack-trunk 1/2/1 to 1/2/2

ICX7450-48 Router(config-unit-1)#stack-trunk 1/2/3 to 1/2/4

ICX7450-48 Router(config-unit-1)#stack suggested-id 2

ICX7450-48 Router(config-unit-1)#write memory

ICX7450-48 Router(config-unit-1)#Flash Memory Write (8192 bytes per dot) .

Write startup-config done.

Copy Done.

ICX7450-48 Router(config-unit-1)#stack enable

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/2/1, 1/2/3 is not 

available.

UNIT 3:

ICX7450-48 Router(config)#stack unit 1

ICX7450-48 Router(config-unit-1)#stack-trunk 1/2/1 to 1/2/2

ICX7450-48 Router(config-unit-1)#stack-trunk 1/2/3 to 1/2/4

ICX7450-48 Router(config-unit-1)#stack suggested-id 2

ICX7450-48 Router(config-unit-1)#stack suggested-id 3

ICX7450-48 Router(config-unit-1)#write memory

ICX7450-48 Router(config-unit-1)#Flash Memory Write (8192 bytes per dot) .

Write startup-config done.

Copy Done.

ICX7450-48 Router(config-unit-1)#stack enable

Enable stacking. This unit actively participates in stacking

Brocade ICX 7450, Brocade ICX 7750, and Brocade ICX 7250 Stacking

Brocade ICX 7450, Brocade ICX 7750, and Brocade ICX 7250 Stacking Deployment Guide

27

53-1003581-03

Summary of Contents for ICX 7250 Stacking




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands