manualshive.com logo in svg

Brocade Communications Systems ICX 7250 Stacking, Deployment Manual

Share
Download
Brocade Communications Systems ICX 7250 Stacking Deployment Manual Download Page 76

ICX7250-24 Switch(config-unit-1)#stack suggested-id 4

ICX7250-24 Switch(config-unit-1)#stack enable

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/2/1, 1/2/3 is not 

available.

UNIT 5:

ICX7250-24 Switch(config)#stack unit 1

ICX7250-24 Switch(config-unit-1)#stack-trunk 1/2/1 to 1/2/2 

ICX7250-24 Switch(config-unit-1)#stack-trunk 1/2/3 to 1/2/4 

ICX7250-24 Switch(config-unit-1)#stack suggested-id 5

ICX7250-24 Switch(config-unit-1)#stack enable

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/2/1, 1/2/3 is not 

available.

UNIT 6:

ICX7250-24 Switch(config)#stack unit 1

ICX7250-24 Switch(config-unit-1)#stack-trunk 1/2/1 to 1/2/2 

ICX7250-24 Switch(config-unit-1)#stack-trunk 1/2/3 to 1/2/4 

ICX7250-24 Switch(config-unit-1)#stack suggested-id 6

ICX7250-24 Switch(config-unit-1)#stack enable 

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/2/1, 1/2/3 is not 

available.

UNIT 7:

ICX7250-24 Switch(config)#stack unit 1

ICX7250-24 Switch(config-unit-1)#stack-trunk 1/2/1 to 1/2/2 

ICX7250-24 Switch(config-unit-1)#stack-trunk 1/2/3 to 1/2/4 

ICX7250-24 Switch(config-unit-1)#stack suggested-id 7

ICX7250-24 Switch(config-unit-1)#stack enable

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/2/1, 1/2/3 is not 

available.

UNIT 8:

ICX7250-48 Switch(config)#stack unit 1

ICX7250-48 Switch(config-unit-1)#stack-trunk 1/2/1 to 1/2/2 

ICX7250-48 Switch(config-unit-1)#stack-trunk 1/2/3 to 1/2/4 

ICX7250-48 Switch(config-unit-1)#stack suggested-id 8

ICX7250-48 Switch(config-unit-1)#stack enable 

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/2/1, 1/2/3 is not 

available.

UNIT 9:

ICX7250-48 Switch(config)#stack unit 1

ICX7250-48 Switch(config-unit-1)#stack-trunk 1/2/1 to 1/2/2 

ICX7250-48 Switch(config-unit-1)#stack-trunk 1/2/3 to 1/2/4 

ICX7250-48 Switch(config-unit-1)#stack suggested-id 9

ICX7250-48 Switch(config-unit-1)#stack enable

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/2/1, 1/2/3 is not 

available.

UNIT 10:

ICX7250-24 Switch(config)#stack unit 1

ICX7250-24 Switch(config-unit-1)#stack-trunk 1/2/1 to 1/2/2 

ICX7250-24 Switch(config-unit-1)#stack-trunk 1/2/3 to 1/2/4 

ICX7250-24 Switch(config-unit-1)#stack suggested-id 10

ICX7250-24 Switch(config-unit-1)#stack enable

Enable stacking. This unit actively participates in stacking

stacking is enable. optical monitoring for stacking ports 1/2/1, 1/2/3 is not 

available.

UNIT 11:

ICX7250-48P Switch(config)#stack unit 1

ICX7250-48P Switch(config-unit-1)#stack-trunk 1/2/1 to 1/2/2 

Brocade ICX 7450, Brocade ICX 7750, and Brocade ICX 7250 Stacking

76

Brocade ICX 7450, Brocade ICX 7750, and Brocade ICX 7250 Stacking Deployment Guide

53-1003581-03

Summary of Contents for ICX 7250 Stacking




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands