Open Defects in Fabric OS v7.0.1 Beta
Fabric OS v7.0.2 Release Notes v1.0
Page 96 of 99
Defect ID:
DEFECT000349012
Technical Severity:
High
Summary:
FICON: Active config is out of synch with FOS indicating a port is blocked after HA failover
Symptom:
Active configuration indicates port is not blocked. FOS indicates port is blocked.
Feature:
FICON
Function:
Ficud
Probability:
Low
Found in Release:
FOS7.0.0
Defect ID:
DEFECT000349150
Technical Severity:
High
Summary:
BES set to faulty, due to I/O sizes greater than 512KB starting at LBA 0 for a encrypted
LUN
Symptom:
BES goes faulty without clear indication of the reason
Feature:
Data Security
Function:
Disk Encryption
Probability:
Low
Found in Release:
FOS7.0.0
Defect ID:
DEFECT000349589
Technical Severity:
High
Summary:
FICON: CE DE received by host 5 seconds after B1 CCW causing channel timeout
Symptom:
IFCC - CREJ Code of 00 until the implementation is completed in the patch branch, and the
CCW is enabled. Until then, it is responded to as an "Invalid CCW Command"
Feature:
FICON
Function:
Ficud
Probability:
Medium
Found in Release:
FOS7.0.0
Defect ID:
DEFECT000350136
Technical Severity:
High
Summary:
Encrypted/Compressed E-Port trunk goes down following CP failover
Symptom:
Encrypted link goes down after hafailover and gets stuck at G-Port.
Workaround:
Slotpoweroff /slotpoweron the blade.
Feature:
16G ASIC Driver
Function:
In-flight encryption/compression
Probability:
Medium
Found in Release:
FOS7.0.0
Defect ID:
DEFECT000350457
Technical Severity:
High
Summary:
Access Gateway N-port stuck in G-port after code upgrade
Symptom:
After upgrade fabric switch attached to AG switch with QoS enabled from 6.2.x to 6.3.x, N-
port stuck in G-Port. Disable QoS on fabric switch port, port came up fine.
Feature:
Field Escalation
Function:
Access Gateway
Probability:
Low
Found in Release:
FOS6.3.1
Service Request ID:
610119
