Fabric OS v7.0.2 Release Notes v1.0
Page 12 of 99
•
Brocade 7800 — On the pull-out tab on the front left side of the chassis underneath the serial
console and Ethernet connection and on the bottom of the switch in a well on the left side
underneath (looking from front)
•
Brocade 8000 — On the switch ID pullout tab located inside the chassis on the port side on the
left and also on the bottom of the chassis
•
Brocade DCX, DCX 8510-8 — Bottom right of the port side
•
Brocade DCX-4S, DCX 8510-4 — Back, upper left under the power supply
3.
3.
3.
3.
World Wi
World Wi
World Wi
World Wide Name (WWN)
de Name (WWN)
de Name (WWN)
de Name (WWN)
When the Virtual Fabric feature is
enabled on a switch, each logical switch has a unique
switch WWN. Use the wwn
wwn
wwn
wwn command to display the switch WWN.
If you cannot use the wwn
wwn
wwn
wwn command because the switch is inoperable, you can get the
primary WWN from the same place as the serial number, except for the Brocade DCX/DCX-4S
and DCX 8510-8/DCX 8510-4. For the Brocade DCX/DCX-4S and DCX 8510-8/DCX 8510-4
access the numbers on the WWN cards by removing the Brocade logo plate at the top of the
non-port side. The WWN is printed on the LED side of both cards.
1.
1.
1.
1.
License Identifier (License ID)
License Identifier (License ID)
License Identifier (License ID)
License Identifier (License ID)
There is only one License Identifier associated with a physical switch or director/backbone
chassis. This License Identifier is required as part of the ordering process for new FOS
licenses.
Use the licenseId
licenseId
licenseId
licenseId command to display the License Identifier.
