Closed with Code Change Defects in Fabric OS v7.0.1
Fabric OS v7.0.2 Release Notes v1.0
Page 78 of 99
Defect ID:
DEFECT000350157
Technical Severity:
Medium
Summary:
pdmd memory increase seen on the standby CP of a DCX 8510-8 with max LS creation and
fully populated EX-Ports after a long period of time with I/O running
Symptom:
pdmd memory usage may increase on the standby CP of 8510-8 with max LS creation and
fully populated EX-Ports after a long period of I/O running..
Feature:
License
Function:
License
Probability:
Low
Found in Release:
FOS7.0.0
Defect ID:
DEFECT000354157
Technical Severity:
Medium
Summary:
Brocade FCOE LACP PDU length is non-standard
Symptom:
Nonstandard size LACP PDUs being discarded at the remote end and Brocade switch could
not form a dynamic LAG with a 3rd party switch.
Feature:
CEE-LAYER2
Function:
LACP
Probability:
Medium
Found in Release:
FOS6.3.1_dcb
Service Request ID:
Defect Origin is Cus
Where Else Fixed:
FOS6.4.2 b GA
Defect ID:
DEFECT000354900
Technical Severity:
Medium
Summary:
Severity level for SCN-1002 is set to "Warning" instead of "Error"
Symptom:
SCN-1002 are displayed as Warnings.
Feature:
Mgmt Embedded - SNMP
Function:
Other
Probability:
Low
Found in Release:
FOS7.0.0
Defect ID:
DEFECT000357181
Technical Severity:
Medium
Summary:
During switch/blade initialization, FX8-24 blades forward BDPU broadcast frames
Symptom:
If STP/BDPU guard is enabled on an ethernet switch port, in some cases during a reboot of
7800/FX8-24 customer will see their ethernet switch ports fenced offline due to rx'ing a
BDPU packet.
Feature:
Field Escalation
Function:
FCIP
Probability:
Medium
Found in Release:
FOS6.4.0
Defect ID:
DEFECT000357783
Technical Severity:
Medium
Summary:
Tape device connected to BES is dropping frames.
Symptom:
Tape Device Driver is failing with a check condition - illegal command while trying to
retrieve a drive dump.
Feature:
Data Security
Function:
Tape Encryption
Probability:
Medium
Found in Release:
FOS6.4.1
Service Request ID:
635267
