Closed with Code Change in Fabric OS v7.0.0c
Fabric OS v7.0.2 Release Notes v1.0
Page 84 of 99
Defect ID:
DEFECT000365069
Technical Severity:
High
Summary:
ICL Ports on 8510 directors show "Mod_Val" on 1 out of 4 ports on a QSFP.
Symptom:
Event log indicates bad QSFP requiring reseat or replacement.
Workaround:
Reseating QSFP may correct the issue.
Feature:
16G Hardware
Function:
16G QSFP
Probability:
Low
Found in Release:
FOS7.0.0
Defect ID:
DEFECT000365071
Technical Severity:
High
Summary:
QSFP port status is not refreshed in WebTools port admin window.
Symptom:
Insertion/Removal of QSFP is not reflected in Port Admin window.
Workaround:
Refresh, or close and re-open Port Admin window.
Feature:
WebMgmt
Function:
Ports Admin
Probability:
Medium
Found in Release:
FOS7.0.0
Defect ID:
DEFECT000365075
Technical Severity:
High
Summary:
QSFP ICL ports are being fenced due to excessive state changes even though current high
threshold value is not exceeded
Symptom:
QSFP ICL links are getting fenced unexpectedly.
Feature:
FABRIC WATCH
Function:
PORT FENCING
Probability:
Low
Found in Release:
FOS7.0.0
Defect ID:
DEFECT000365794
Technical Severity:
High
Summary:
In an IPSec configuration between FX8-24 and 7800, some circuits never come online
Symptom:
IPSec circuits stuck in a In-progress state.
Feature:
FCIP
Function:
FCP TCP/IP Stack
Probability:
Low
Found in Release:
FOS7.0.1
Defect ID:
DEFECT000368931
Technical Severity:
High
Summary:
Deprecate FruReplace CLI command in FOS
Symptom:
Use of FruReplace command in the process of performing replacement of a defective WWN
card will result with a potential failed transfer leaving the replacement WWN card unusable.
Feature:
FOS-Infrastructure
Function:
Other
Probability:
Low
Found in Release:
FOS7.0.0
Service Request ID:
673189
