install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
4.
Select the
[Enter]
PixButton to apply the
countdown time, as shown on the right.
The new time will be shown in the display,
as shown on the right.
To control the countdown timer:
1.
To start counting down, press the
[<]
motion
control button, it will illuminate orange, as
shown on the right.
The Multi-View and display will start to
update.
2.
To pause the countdown, press the
[<]
motion control button, and the timer will
stop and the button will no longer be
illuminated, as shown on the right.
3.
To continue counting down from the paused
time, press the
[<]
motion control button,
the button will illuminate orange.
4.
To reset the countdown to the start, press
the
[|<<]
motion control button.
The countdown will stop (if it was playing),
and reset automatically to the last
countdown time used.
5.
When a countdown reaches the end/0, the
counter has 2 modes, either stop at zero or
start counting up to show the expired time.
To have a countdown timer stop at zero,
select the
[Stop at Zero]
PixButton, the
display will now read out Count stops at
zero, as shown on the right.
To have the counter reverse and start
counting up, select the
[Go Up at Zero]
PixButton, the display will now read Count
reverses at zero, as shown on the right.
2.5.10