install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
7.18.4 Selecting KiPro Control in a Production
To assign the device controls to KiPro Control:
Press the
[AJA KiPro]
wildcard [Device Selection] PixButton
and it will illuminate orange and the following device controls will be appear.
KiPro Control device controls:
PixPad
To select which device and
clip you wish to control
Motion Controls
Start and stop recording,
play, rewind and jump to
beginning of a clip
When you press the KiPro Control PixButton, the active device an clip will be whichever
clip wad last used, or the first device if you are just starting.
The display indicates 4 pieces of information:
1.
The top left corner always shows the KiPro unit currently assigned to the panel’s
bank of device controls. In this case, the words
KiPro1
indicate that they are set
to KiPro Unit 1.
2.
Clip XXX
indicates the selected clip name.
3.
The bottom left side displays status information for the selected clip, if it’s
playing, recording, rewinding, and other status information like lose of input
when recording, in the case
Playing Forward
4.
The bottom right side displays a timecode counter for the selected clip. When
playing/recording HH:MM:SS are displayed, when stopped/paused
HH:MM:SS:FF are displayed.
Display
shows active KiPro unit, selected clip name and status
information
7.18.4