install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
7.10.3 Motion controls for Telemetrics Cameras
For Telemetrics camera systems all 3 motion control buttons control a setting, either
a speed setting or a direction selection for the joystick. The Play > motion control
switches from the default/normal speed to the selectable/custom speed set in the
Camera Control Settings window. The Rewind |<< motion control changes the
joystick speed (1-6) similar to the setting in the Camera Control Settings window. The
Back < motion control changes the direction the joystick is used for, either P/T for
Pan/Tilt or X/Y for Pedestal Up/Down and Dolly In/Out.
These controls apply only to the Telemetrics Camera Control and not to Sony, Hitachi
or Panasonic.
To control the speed of manual camera functions:
Default
If you wish to use the default/normal speed for the joystick, press the
[>]
motion button and it will illuminate orange. The display will read out “Default
Speed”, as shown below. Now when you move the joystick the motion will be
at a medium rate, compared to the Fast setting. When you let go of the
joystick, the [>] button will remain on the default function.
Selectable
If you wish to move faster or slower than the default mode, ensure that Play
motion control is not illuminated. If turned on, press the
[>]
motion button and
it will turn off. The display will read out “Selectable Speed”, as shown below.
Now when you move the joystick the motion will be at selected speed
assigned in the Camera Control Settings window.
7.10.3
Focus Iris M.Black
Focus Iris M.Black