install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
4.11.8
To Run a Macro:
1.
On the Remote Panel, select the
[Macro]
button, it will
illuminate green, as shown on the right.
The A PixButton will turn to a Stop button and the B
PixButton will turn to a Play button. Any assigned memories
will now appear on the input PixButtons. The Output
PixButton is disabled in the Macro mode.
2.
To run a Macro or a SnapShot MEM, select
the desired
[PixButton],
the button will
illuminate red, as shown on the right.
3.
If a Macro has a pause point, the PixButton will illuminate
orange, as shown on the right. To resume playing a paused
macro, re-select the active
[PixButton]
or press the
[B]
input PixButton with the red Pause icon.
The Macro PixButton will illuminate red and the B PixButton
will illuminate orange and turn to a Play icon.
4.
To stop running a macro, re-select the macro/SnapShot
[PixButton]
or select the
[A]
input PixButton with the
orange Stop icon.
The memory PixButton will return to a green/not selected
state.
5.
To access memories 12-22, select the
[Shift]
button, it will
illuminate yellow, as shown on the right. Repeat steps # 2-4
to control memories 12-22.
All shifted memories will blink when selected, playing or
paused to signify they are on the shifted row.
To return to memories 1-11 select the
[Shift]
button and the
button will turn off.
6.
To return to the output selection mode, select the
[Macro]
button and it will turn off, as shown on the right, and the
input PixButtons will show the enabled inputs.
Lock
Macro
NOTE:
Only one Macro at a time may be played out. Selecting a Macro while one is playing
will stop the Macro.
A B
Shift
Lock
Macro