install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
4.2.3 Background Mix Transition
A mix is a ‘soft’ transition that dissolves between two images.
To perform a Mix:
1.
The background transition button must be on and illuminated. If it is not
already on, press
[Bgr]
, and it will illuminate orange.
2.
On the preview bus, select the source you wish to transition to by pressing
its button. The button will light orange and the selected source is displayed
in the preview monitor.
3.
If not already lit, press the
[Mix]
button, which will illuminate orange.
(The effects PixButton to the right of it will change to green)
4.
Press the
[Auto Trans]
button.
This will bring the selected source to program, and whatever was on
program to the preview monitor. The illuminated buttons will also “flip-flop”
on the program and preview rows. During the transition, the color of both the
Auto and Preview Source buttons will change from orange to red. You can
change the rate at which the mix occurs, as described in the rates section,
see section 4.3.3.
5.
To execute a manual mix, move the
Fader Arm
up or down.
4.2.3