install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
A.1
6.
At the end of the installation, the Switcher
Setup window will automatically appear, as
shown on the right.
New firmware will now begin to be installed
on the various boards in the Mica Switcher.
This process may take between 10-20
minutes for proper installation.
Do not interrupt this process, as
damage to the hardware may occur.
7.
When complete, the Switcher Setup
window will close and an Installation
Complete window will appear, click on the
Close
button, as shown on the right.
8.
Shutdown
the System by selecting the
Start Menu and selecting Shutdown.
9.
Wait about 15 seconds and
Power on
the
Mica System using the larger rocker switch.
10.
Double-click on the BPswitcher icon and
load a show, as described in section 1.7.
11.
If the control panel needs updating, it will
automatically be updated when the show is
loaded, a progress bar will appear.
Once the progress bar disappears, the
Mica System is now upgraded.
You may now start to use the new features.