install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
4.5.1 To Create a DVE Box:
1.
Press the Key transition button for the desired keyer, either
[Key 1
Transition], [Key 2 Transition]
,
[Key 3 Transition]
,
[Key 4 Transition],
[Key 5 Transition]
or
[Key 6 Transition]
and it will illuminate orange, and
the content of the key will appear on the preview monitor. This example will
use Key 1.
2.
Select the Keyer you wish to use by pressing either
[Key 1 Select]
,
[Key 2
Select], [Key 3 Select],
[Key 4 Select], [Key 5 Select]
or
[Key 6 Select]
.
This will assign the Device Controls to the Keyer selected, as described in
section 4.4.2.
3.
Press the
[DVE OnOff]
PixButton on the Keyer Modifier PixPad, which will
cause the word (DVE) to appear in the display to let you know the DVE is
applied, as shown below:
4.5 DVE Boxes (Picture in Picture)
All 6 Keyer may have a DVE (Digital Video Effect) Box, otherwise known as a Picture-in-
Picture, applied to it. In television news shows, the DVE Box is used extensively for “over-
the-shoulder” boxes that may contain a still, clip or another camera.
The DVE Box enables one video or graphic to be
placed in a smaller picture on top of the background
video.
If PowerAux is enabled, Key 6 may not have DVE
enabled.
4.5
Key1 (Ra1, DVE)
Rate