install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
7.19.5
5.
Click on the
Play
button to start the
VOX automation, as shown on the
right.
6.
The Current state status will turn
green indicating that VOX is listening
for actions.
By now a General Macro followed by
its corresponding General Title Macro
should be running. Every time VOX is
started for the first time, a General
Macro is triggered.
7.
As inputs start to receive audio levels,
the front LEDs of the VOX unit will
illuminate to represent that a signal is
active, those LEDs are also visible in
the VOX software under the Active
row, as shown with input 1 on the
right.
A Mic Macro should now be running,
followed by its corresponding Title
Macro.
As other inputs receive signal their
Macros will be triggered.
8.
If for some reason an input needs to
be muted so that no Macros from that
input are triggered, click on the yellow
Enabled
button to disable that input,
for example input 4 is not enabled
and no Macros will be triggered.
9.
To pause the automation, click on the
middle
Pause
button, as shown on
the right, and it will turn grey.
If the Pause command from the
override panels were trigged, then
this button would also turn grey.